From Squeezely, API calls are sent with updates of Squeezely Audiences to Deployteq. To save the Audience id's in Deployteq, they need to be mapped to Deployteq fields. Next, you can easily segment the profiles in Deployteq based on the Squeezely Audience id's
View audience API calls
You can view the updates of audience id's as follows:
In Deployteq, go to the Squeezely App
Click on 'View logs'.
Find a log with the type 'segments' and click on the information icon
Click on 'RAW Data' to view the synchronized data of the profile
Before saving the audience id's they need to be mapped correctly in Deployteq. This mapping can be set via a so called 'layout'.
Mapping Audience id's
In the example below, the Audience id's are mapped to the profile in Deployteq.
In the Deployteq Store, go to the Squeezely App
Select 'Customize data mapping'.
Double click on the End point 'segments'
Click on the '+' icon under 'Connected fields
Open the tab 'Layouts' in the menu on the right
Double click on 'include-segments
Go back to the Squeezely App and select 'Customize data mapping
Go to the layout 'include-segments
Click on the different mappings under 'connected fields
Change the first value from '0' to 'Wildcard
✅ In the data model of Deployteq, the audience id's are stored in the table 'squeezely_segments'
Using Audience Id's
The audience id's can be used in Canopy by navigating to 'profiles' in the left menu of CanopyDeploy.
Create a new profile.
Select Squeezely_segments 'id'.
Fill in the audience id you want to match
Add squeezely_segments 'active'
select 'yes' to select the profiles that are in the audience.
✅ You have now segmented the profiles from your audience in Canopy.